Double disc friction press for ten inspection items
1, the base of the friction press should meet the requirements of the machine tool manual, and there is no crack.
2. There is no oil stain on the surface between the friction plate and the flywheel, and the locking nut for adjusting the clearance is reliable.
3. The friction plate has no cracking damage, and the inclined friction loss is less than 1mm.
4. The connection between the bearing seat and the fuselage is firm and there is no loosening.
5, friction press spindle on the adjustment of friction and flywheel clearance thread without sliding-wire phenomenon.
6. The pressing bolt fastening the flywheel on the main screw is not loose.
7. The belt of the friction press is well combined with the flywheel groove, without the phenomenon of "soft movement".
8. The rivet with friction belt is made of copper, and the rivet head is not exposed.
9, friction belt no damage or fracture phenomenon, no lubricating oil immersion.
10. The main screw of the friction press is firmly connected with the pressing flange, and the rotation is flexible.
The above is the double disc friction press ten inspection items, to let the staff carefully comply with.